Step 1

(see picture)

Identify all necessary components:
1. Duffle bag
2. Four poles (two long gray, one medium gray, one short black)
3. Tent
4. Rain fly (cover)

Step 2

(see picture)

Drop tailgate to down position.

(see picture)

Spread tent out in bed of truck, making sure to have the door face the rear of the truck.

Step 3

(see picture)

Identify all 9 securing straps
3 on the back of the box

(see picture)

3  on left and right side of the tent.

(see picture)

Secure 3 rear straps to bumper.

Step 4

(see picture)

Secure all six straps on the right and left hand side of truck by hooking  two under the truck body and one in the wheel well. Tent sides will over lap perimeter of truck bed.

Step 5

(see picture)

Erect  all poles to full length. Insert first 3 poles through sleeves, starting with the longest two corner to corner, then the side to side.(Pic  4 of 433) Begin by each inserting pole into the sleeve end closest  to truck bed, feeding pole towards the truck cab, making sure to insert  pole into corresponding sleeve at mid point.

Step 6

(see picture)

Once the poles are inserted through the sleeves, insert one end of the  pole into one of the pockets at the side strap securing points.

(see picture)

Feed poles towards secured end from the unsecured end and insert pole into  securing pocket, this will cause the pole to arch and begin erecting the tent.

Step 7

(see picture)

Once all 3 poles have been secured in their opposing pockets, open door to insert the last pole (black pole).

(see picture)

Insert pole between blue and gray portion above tent door.

(see picture)

Locate hollow grommet at top of tent. Feed black pole through grommet, bringing  it inside the tent.

(see picture)

Continue feeding pole along tent seam until you can insert it into the pole pocket. Insert other end of pole into pocket at the tip of gray door overhang portion. Secure velcro centering straps to black pole.

(see picture)

Assembly is complete.

Step 8

(see picture)

Fly  installation is optional

Match location of logos on tent and fly. Drape fly over tent and secure  the six fly guy hooks to the "D" shaped rings located on top of the  six main pole pockets.